Aston Origin / Aston Origin Black Bundle ไมโครโฟนคอนเดนซ์เซอร์
✅รับส่วนลด 10% สูงสุด 1000บาท กรอก DDX10JUNW1
✅รับเงินคืน 15% สูงสุด 1000coin กรอก CCB15JUNW1
📅 วันนี้ - 9 มิ.ย. 2024 เท่านั้น
The Aston Origin is a high-performance cardioid condenser microphone utilising a one inch (1″) gold evaporated capsule. It is versatile enough to use with most instruments and excels on acoustic guitar and vocals. Its hand-selected capsule is teamed with high-end transformer-less circuitry using only the best components.
The Origin คอนเดนซ์เซอร์ ไมค์โครโฟน คุณภาพสูง มาพร้อมฟังค์ชั่นครบครัน เหมาะสำหรับงานบันทึกเสียง และงานใน Studio Rec.
Wave-Form Mesh Head
The Aston Origin has our signature wave-form mesh head. This unique design not only looks great but delivers an unprecedented degree of protection for the heart of your microphone the capsule. The shock resistant wave-form design allows the head of the mic to distort if given a heavy knock and then return to its normal position without any damage at all. It also offers a degree of off-axis rejection helping to eliminate unwanted artefacts from your recordings.
Built In Pop Filter
Aston’s vocal condenser microphones have an exclusive mesh-knit pop filter built into the wave-form head. The random weave allows soundto pass while virtually eliminating unwanted plosives at source. It also shields against multiple wavelengths of electromagnetic radiationmaking our microphones ideal in critically sensitive electronic applications. This completely encapsulating single piece mesh cage is formed in stainless steel so won’t rust with use and can even be removed and washed.
End Caps
Yet another unique design element of the Aston Origin is the use of custom moulded end caps with integrated XLR and stand adaptor. No other mic has this. Because the internal shock absorption system is so good you can mount the microphone directly to a stand via this built in and interchangeable thread adapter. The design also makes Aston microphones extremely easy to repair and maintain.
Chassis
Part of the beauty of our microphones is the custom finish of each chassis. There are no mass-produced paint job finishes here… instead each chassis is individually tumbled for up to 4 hours to give it a very hard-wearing and extremely beautiful finish. To perfect the look each microphone is separately engraved with its legends and our brand mantra… ‘The art of performance’
PCB
Superbly balanced mix of discrete and integrated electronic circuitry.
Harmonized circuit stage arrangement for easy integration from phantom power input circuitry to capsule voltage bias.
A novel non-linear voltage/current source rectification to provide controlled amplification and smooth/ clear audio.
Eco-Friendly Packaging
We have put our hearts and minds into creating the most beautiful performance pieces possible with each Aston product. When it comes to packaging we believe simplicity is king. Protective re-useable environmentally sensible packaging that doesn’t cost the earth.
Features
Custom-molded end caps with integrated XLR and stand adapter
Harmonized circuit-stage arrangement for easy integration from phantom-power input circuitry to capsule voltage bias
Non-linear voltage/current-source rectification to provide controlled amplification and smooth/clear audio
TRANSDUCER TYPE: Condenser
ACOUSTIC OPERATING PRINCIPLE: Pressure Gradient
DIRECTIONAL POLAR PATTERN: Cardioid
FREQUENCY RESPONSE: 20Hz – 20kHz (+/-3dB)
EQUIVALENT NOISE LEVEL: 18dB A-Weighted
SENSITIVITY AT 1KHZ INTO 1KOHM: 23.7mV/Pa
MAXIMUM SPL FOR THD 0.5%: 127dB
SIGNAL-TO-NOISE RATIO (REL. 94DB SPL): 76dB A-Weighted
PAD SWITCH: -10dB
LOW-CUT FILTER: 80Hz
48 Volt Phantom power (+/- 4 Volts) is required for operation